Recommended Access Points
The table below includes a list of tested and vetted access points in addition to relevant configurations necessary to guarantee smooth operation in production. This list is non-exhaustive and will be updated over time.
| Brand |
Model |
Required Config |
Config File |
| Mikrotik |
cAP AC |
- Bridge Mode |
|
- 5Ghz Only Z/AC
- Multicast Helper Enabled (Full)
- IGMP Snooping Enabled
- IGMP Fast Leave Enabled
- IGMP V3 Enabled
- Multicast Buffering Disabled
- Set Basic Rates to at least 24mbps and up. | ‣ |
| Mikrotik | cAP ax | - Bridge Mode
- 5Ghz Only Z/AC
- Multicast Helper Enabled (Full)
- IGMP Snooping Enabled
- IGMP Fast Leave Enabled
- IGMP V3 Enabled
- Multicast Buffering Disabled
- Set Basic Rates to at least 24mbps and up. | ‣ |
| Alta Labs | AP6 Pro | - ANY CHANGE IN THE WEBUI WILL REPLACE THE MANUAL CONFIG IF IT IS NOT IN ATTACHED FILE
- Create Wifi Name: ShowNet
- 5Ghz DTIM 1
- Disable DPI
- Enable Multicast Enhancement
- Open terminal by shift clicking on name
- Run:
iw dev
- Look for the interface ID associated with ShowNet
- Run:
cfg80211tool ${your_interace} mcastenhance 5
- Run:
wlanconfig ${your_interface} hmmc add 239.0.0.1 255.255.255.255
- The config attached should be placed in
/cfg/ | ‣ |
| | | | |